Network Function Integrated Type Laser Displacement Sensor HL-G2 SERIES

High-precision Displacement Sensors Made Easier to Use

NEW

Network Function Integrated Type
Laser Displacement Sensor
HL-G2 SERIES

New Standard for Displacement Sensors

Offering Both High Accuracy and Convenience

Industry’s top-class^*1 measuring performance

High-precision Measurement

The HL-G2 sensors deliver the performance rivaling those of displacement meters of one class above, thanks to the optimized and balanced devices, optical system, mechanisms and algorithm.

*1: According to our company’s survey, as of February 2024.
*2: Specifications vary depending on models.

Built-in controller and communication unit

Easy-to-use Integrated Models

The integrated models feature built-in controllers to facilitate model selection and reduce installation space and cost. Furthermore, it can easily connect to a PLC with just this one device.

* Communication function is provided only in the communication type models.
* EtherNet/IP is a trademark or a registered trademark of ODVA (Open DeviceNet Vendor Association).
* SLMP is a registered trademark of Mitsubishi Electric Corporation.
* Modbus is a registered trademark of Schnelder Electric USA Inc.

Network Function Integrated Type Displacement Sensor HL-G2

Simple and intuitive operations

Setting Tool Software

By using the PC installed with the “HL-G2 Configuration Tool” configuration tool software (free to download), parameters can be set easily and simultaneously in multiple HL-G2 units.

Easy-to-use tool software

Five different measuring ranges and two different output types available

Wide Product Lineup

Output Type Product Lineup

Lineup of Measuring Ranges

Applications

Inspection of automobile part shape

The HL-G2 series can be used for the measurement of the dimensions of rubber parts. The improved optical design of the HL-G2 sensors ensures stabler measurement of low-reflection parts as compared to previous products.

Inspection of camera actuator operating amount

The HL-G2 series can compare auto-focus actuator control current and value measured by the sensor for the confirmation of operation. The communication type models do not require an A/D conversion program so that numerical control is easier.

Inspection of flatness of metal frame

The HL-G2 series can be used for the inspection of flatness of products. All HL-G2 models feature a line spot specification, so they provide stable measurement performance even if the workpiece has hair lines or relatively rough surface.

Confirmation of remaining roll amount

The HL-G2 series can be used to check the remaining amount of workpieces in a roll-like shape. With a built-in communication unit, the HL-G2 sensors can communicate via network for assuring traceability and collecting data at low cost.

Control of dispenser height

The HL-G2 series can be used for the detection of the distance to workpiece for control purposes. The sensors perform sampling at high speeds so smoother equipment control is possible.

Detection of overlapping rubber parts

The HL-G2 series can be used for the detection of overlapping rubber parts. The improved optical design of the HL-G2 assures stabler detection of low-reflection workpieces as compared to previous products.

NEW